Swirlie - 64mm Brushless FPV Quad

$0.00 USD
SKU: SwirliePowerUpFrskyXM

Free Singpost registered mail ( 8 to 14 days)  for all orders. Orders above USD 200 in value will be upgraded to Express shipping( 2 to 5 days).

With Short Crayon Design’s relentless constant effort to push the boundary of how small a brushless setup can get, the Swirlie was born. Swirlie is designed with the goal of small and simple setup. The Swirlie may look sweet. It can perform indoors and out. It's 64mm sized (same as Inductrix), brushless, full removable prop guard, and tough.

Swirlie’s nut cracking toughness comes from 1.5mm carbon fibre 4K baseplate and highly durable nylon prop guard. Swirlie is designed to power by 4 x 10000Kv brushless motors with 40mm props (drilled out to 1.45mm) fully programmable Betaflight micro flight controller, and DShot capable 4-in-1 10A 6A esc, with 2s lipo.

Make your Swirlie Wild and Loud! During checkout, state your preferred colors for your nylon prop guard, mounts and struts. Available colors are orange, violet, blue, yellow, lime green, peacock green, and red. If not stated, random colors.

The Swirlie frame fit comes with the following:

  • 1 x 1.5mm 4K Carbon Fiber baseplate
  • 1 x Nylon prop guard (3D printed by 65Drones)
  • 1 x TPU Femto mount (3D printed by 65Drones)
  • 1x TPU 2S 300mah battery holder (3D printed by 65Drones)
  • 1x TPU AIO VTX camera mount (3D printed by 65Drones)
  • 4 x TPU prop struts (3D printed by 65Drones)
  • 2 x ESC spacers (3D printed by 65Drones)
  • 1 x Nylon screws standoffs nuts set
  • 1 x Winder Wonder Works' prop cutter

Save time and money by adding Electronic kit sets for Swirlie to your Swirlie’s frame kit purchase. The choice of the components in Electronic kit sets for Swirlie are measured for Swirlie and tested to ensure that these components really give Swirlie its wild performance.

Power-Up (with DYS BE1102-Emax Femto) Component Kit Set for Swirlie, contains:

  • 1 x Emax Femto micro F3-based flight controller
  • 1 x VM275T v1.1 5.8Ghz VTX AIO
  • 4 x DYS BE1102 10000Kv brushless (with N52 magnets and NSK) motors
  • 1 x XT30 or JST connectors
  • 1 x Sunrise Cicada 4-in-1 6A Dshot ready ESC
  • 4 x 40mm props (2 x CW, 2 x CCW)
  • 1 x Winder Wonder Works' prop cutter

Add one of these micro radio receivers that fit in Swirlie perfectly, to complete your Swirlie:

  • FrSky XM receiver
  • DSM2 micro receiver
  • Flysky FS-A8S receiver (for FlySky radio owners)
  • RadioLink R6DSM (for Radiolink AT9 and AT10 owners)

Customer Reviews

Based on 1 review Write a review
Continue shopping
Your Order

You have no items in your cart