Cobra Champion Series CP2205 v2.1 Motors

$37.98 USD
SKU: 12121

Back in stock ! Orders will be fulfilled on Tuesday .

The Cobra Champion series motors are the most powerful versions ever made for FPV Racing! A completely new design that increases cooling and efficiency, these motors provide the ultimate power for your FPV Racing Quads. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the CP2205 motors come without bullet connectors ,and feature extended pre-tinned motor leads that are 2-1/4 inches (55mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.

The CP2205 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included nylon insert prop nut, which has an integrated prop washer, provides a solid attachment for your propellers that will not loosen up and slip during use.

Also included with every Cobra CP-2205 Series Motor is a complete accessory pack, which includes everything you need to securely mount the motor to your quad frame, and to mount the prop to the motor.

Every motor comes with the following items:
● Four M3x6mm Socket Head Motor Mount Screws
● Four M3 Flat Washers
● One Machined Aluminum Prop Washer
● One Locking Prop Nut with Nylon Insert


Cobra CM-2205/2300 Motor Specifications
 Stator Diameter  22.0 mm (0.866 in)
 Stator Thickness  5.0 mm (0.197 in)
 Number of Stator Slots  12
 Number of Magnet Poles  14
 Motor Wind  28 Turn Delta
 Motor Kv Value  2300 RPM per Volt
 No Load Current (Io)  1.13 Amps @ 10 Volts
 Motor Resistance (Rm) per Phase  0.084 Ohms
 Motor Resistance (Rm) Phase to Phase  0.056 Ohms
 Maximum Continuous Current  22 Amps
 Max Continuous Power (3-cell Li-Po)  245 Watts
 Max Continuous Power (4-cell Li-Po)  325 Watts
 Motor Weight  29.8 grams (1.05 oz.)
 Outside Diameter  27.9 mm (1.098 in.)
 Motor Shaft Diameter  3.00 mm (0.118 in.)
 Prop Shaft Diameter  5.00 mm (0.197 in.)
 Motor Body Length  16.1 mm (0.634 in.)
 Overall Shaft Length  33.6 mm (1.323 in.)
 Motor Timing  5-10 degrees
 PWM Frequency  8 KHz
Continue shopping
Your Order

You have no items in your cart